SLUDGE SEPARATOR (6000 L/HR)

Technical Specification and Performance ;

• Capacity : 6000 l/hr, discharge using nozzle size of not more than 1.7 mm diameter
• Inlet Temperature : approximately 100C
• Static Supply Pressure : 2 metres head (6.6 feet head)
• Maximum Oil Loss on Non-Oily Solids : 12.5%
• Maximum Oil on Wet Basis in Inlet Sludge : 12%
• Maximum Non Oily Solid on Wet Basis in Sludge Inlet : 6%
• Speed of Star-Bowl : Designer's speed
• Motor : 30 HP TEFC Squirrel Cage of approved make 1450 RPM
• Make of Fluid Coupling : Transfluid KSD 12, with 200 pcd 4-5 - grooves pulley
• Driven Pulley (on separator) : 4-5 - grooves to suit final speed and match fluid coupling pulley
• Material & Thickness of Bowl : 9 mm Stainless Steel 304L
• Material of Splash Guard : 4.5 mm Stainless Steel 304
• Material of Shaft : Carbon Steel
• Material of Nozzles : Hexoloy (USA) or better
• Material of Body (casing) : Cast Iron
• Thickness of Body (casing) : 22 mm thick at any one part
• Material of Bearing Housing : Cast Iron

Source : Proskima Sdn. Bhd.